Making a former Slave HD bootable

Try doing a simple repair operation. If that doesn't work, do a full
repair install.

--

- Gary Chanson (Windows SDK MVP)
- Abolish Public Schools


"aa" wrote in message

> I forgot to mention that when I boot from Partition Magic rescue diskette or
> from Boot Magic Rescue diskette, this disk is shown as Active Primary
> bootable yet it would not boot saying that its configuration is wrong
>
> "aa" сообщил/сообщила в новостях следующее:
>
> > I have two harddrives on my PC, teh Primary has XP and the Slave has w2k
> >
> > The Primary HD crushed, I took it out and moved the Slave in its place,
> > while seting the jamper on the Slave into "Master or single drive"
> position.
> >
> > Now how do I make this HD bootable?
> >
> >
>
>
 >> Stay informed about: Making a former Slave HD bootable 

What exactly do you expect to repair? Which particular simple repair
operation would you suggest?
This HD has not been damaged and I still can read drom it.
But I guess to be bootable it needs something like Master boot record which
I guess, never been there as it was a slave drive.

Which repair operation will create or restore a Master boot record?

"Gary Chanson" сообщил/сообщила в новостях
следующее:
> Try doing a simple repair operation. If that doesn't work, do a full
> repair install.
>
> --
>
> - Gary Chanson (Windows SDK MVP)
> - Abolish Public Schools
 >> Stay informed about: Making a former Slave HD bootable 

"aa" wrote in message

> What exactly do you expect to repair? Which particular simple repair
> operation would you suggest?
> This HD has not been damaged and I still can read drom it.
> But I guess to be bootable it needs something like Master boot record which
> I guess, never been there as it was a slave drive.
>
> Which repair operation will create or restore a Master boot record?

I don't have enough information to know what is missing.

A simple repair operation will check to make sure that all of the system
files are intact and will check various things like boot parameters. This
operation is one of the first things that the Win2K setup program offers. I'm
not sure where (if at all) it appears in the XP setup.

A full repair install will fix almost anything including the master boot
record. This operation is offered near the end of setup, when it detects a
previous installation.

If all you need to fix is the master boot record and/or the boot
configuration files, run the setup CD and launch the repair console. In the
repair console, execute FIXMBR and FIXBOOT.

--

- Gary Chanson (Windows SDK MVP)
- Abolish Public Schools
 >> Stay informed about: Making a former Slave HD bootable 

What kind of a repair install operation will fix the drive letter in all the
paths stored in the registry? Originally this drive had a different drive
letter, didn't it?

-Paul Randall

"Gary Chanson" wrote in message

>
> "aa" wrote in message
>
>> What exactly do you expect to repair? Which particular simple repair
>> operation would you suggest?
>> This HD has not been damaged and I still can read drom it.
>> But I guess to be bootable it needs something like Master boot record
>> which
>> I guess, never been there as it was a slave drive.
>>
>> Which repair operation will create or restore a Master boot record?
>
> I don't have enough information to know what is missing.
>
> A simple repair operation will check to make sure that all of the
> system
> files are intact and will check various things like boot parameters. This
> operation is one of the first things that the Win2K setup program offers.
> I'm
> not sure where (if at all) it appears in the XP setup.
>
> A full repair install will fix almost anything including the master
> boot
> record. This operation is offered near the end of setup, when it detects
> a
> previous installation.
>
> If all you need to fix is the master boot record and/or the boot
> configuration files, run the setup CD and launch the repair console. In
> the
> repair console, execute FIXMBR and FIXBOOT.
>
> --
>
> - Gary Chanson (Windows SDK MVP)
> - Abolish Public Schools
>
>
>
 >> Stay informed about: Making a former Slave HD bootable 

"aa" wrote in message

>I have two harddrives on my PC, teh Primary has XP and the Slave has w2k
>
> The Primary HD crushed, I took it out and moved the Slave in its place,
> while seting the jamper on the Slave into "Master or single drive"
> position.
>
> Now how do I make this HD bootable?
>
>

It depends.

If the partition on the slave disk is a logical drive inside
an extended partition then you have to use a third-party
product such as Acronis to convert the logical drive into
a primary partition.

If it is already a primary partition then you can do this:
- Boot the machine with a Win98 boot disk (www.bootdisk.com)
- Execute this command:
fdisk /mbr

The command will restore your MBR. If someone
tells you that this won't work for NTFS partitions,
ignore them. The MBR is not part of the file system.

Another method requires you to boot the machine
with your Win2000 boot CD, go into the Recovery
Console and execute these commands
fixboot
fixmbr

Your machine may or may not boot after this. If it
does not, post again.
 >> Stay informed about: Making a former Slave HD bootable 

Thanks.
What about NTLDR, boot.ini etc ?
As I never booted from this HD as it was slave, then these files are removed
together with the faulty master disk. If so I need to somehow restore them?

"Pegasus (MVP)" сообщил/сообщила в новостях следующее:

>
> "aa" wrote in message
>
> >I have two harddrives on my PC, teh Primary has XP and the Slave has w2k
> >
> > The Primary HD crushed, I took it out and moved the Slave in its place,
> > while seting the jamper on the Slave into "Master or single drive"
> > position.
> >
> > Now how do I make this HD bootable?
> >
> >
>
> It depends.
>
> If the partition on the slave disk is a logical drive inside
> an extended partition then you have to use a third-party
> product such as Acronis to convert the logical drive into
> a primary partition.
>
> If it is already a primary partition then you can do this:
> - Boot the machine with a Win98 boot disk (www.bootdisk.com)
> - Execute this command:
> fdisk /mbr
>
> The command will restore your MBR. If someone
> tells you that this won't work for NTFS partitions,
> ignore them. The MBR is not part of the file system.
>
> Another method requires you to boot the machine
> with your Win2000 boot CD, go into the Recovery
> Console and execute these commands
> fixboot
> fixmbr
>
> Your machine may or may not boot after this. If it
> does not, post again.
>
>
 >> Stay informed about: Making a former Slave HD bootable 

A repair install will fix the system paths, but it won't fix all of the
paths associated with installed programs. Some third-party utilities will fix
a lot of these problems, but probably not all of them (and will probably break
some things in the process).

--

- Gary Chanson (Windows SDK MVP)
- Abolish Public Schools


"Paul Randall" wrote in message

> What kind of a repair install operation will fix the drive letter in all the
> paths stored in the registry? Originally this drive had a different drive
> letter, didn't it?
>
> -Paul Randall
>
> "Gary Chanson" wrote in message
>
> >
> > "aa" wrote in message
> >
> >> What exactly do you expect to repair? Which particular simple repair
> >> operation would you suggest?
> >> This HD has not been damaged and I still can read drom it.
> >> But I guess to be bootable it needs something like Master boot record
> >> which
> >> I guess, never been there as it was a slave drive.
> >>
> >> Which repair operation will create or restore a Master boot record?
> >
> > I don't have enough information to know what is missing.
> >
> > A simple repair operation will check to make sure that all of the
> > system
> > files are intact and will check various things like boot parameters. This
> > operation is one of the first things that the Win2K setup program offers.
> > I'm
> > not sure where (if at all) it appears in the XP setup.
> >
> > A full repair install will fix almost anything including the master
> > boot
> > record. This operation is offered near the end of setup, when it detects
> > a
> > previous installation.
> >
> > If all you need to fix is the master boot record and/or the boot
> > configuration files, run the setup CD and launch the repair console. In
> > the
> > repair console, execute FIXMBR and FIXBOOT.
> >
> > --
> >
> > - Gary Chanson (Windows SDK MVP)
> > - Abolish Public Schools
> >
> >
> >
>
>
 >> Stay informed about: Making a former Slave HD bootable 

fdisk /mbr did not help. Id does no send any messages - just pause for a
second and returns the prompt - is it supposed to be like this?
BTW an attempt to boot says that w2k could not start because of a computer
hardware config problem. Could not read from the selected boot disk. Check
boot path and disk hardware. So it somehow knows that I want to load w2k
which should mean that the boot sector is OK?
"Pegasus (MVP)" сообщил/сообщила в новостях следующее:

>
> "aa" wrote in message
>
> >I have two harddrives on my PC, teh Primary has XP and the Slave has w2k
> >
> > The Primary HD crushed, I took it out and moved the Slave in its place,
> > while seting the jamper on the Slave into "Master or single drive"
> > position.
> >
> > Now how do I make this HD bootable?
> >
> >
>
> It depends.
>
> If the partition on the slave disk is a logical drive inside
> an extended partition then you have to use a third-party
> product such as Acronis to convert the logical drive into
> a primary partition.
>
> If it is already a primary partition then you can do this:
> - Boot the machine with a Win98 boot disk (www.bootdisk.com)
> - Execute this command:
> fdisk /mbr
>
> The command will restore your MBR. If someone
> tells you that this won't work for NTFS partitions,
> ignore them. The MBR is not part of the file system.
>
> Another method requires you to boot the machine
> with your Win2000 boot CD, go into the Recovery
> Console and execute these commands
> fixboot
> fixmbr
>
> Your machine may or may not boot after this. If it
> does not, post again.
>
>
 >> Stay informed about: Making a former Slave HD bootable 

"aa" wrote in message

> fdisk /mbr did not help. Id does no send any messages - just pause for a
> second and returns the prompt - is it supposed to be like this?
> BTW an attempt to boot says that w2k could not start because of a computer
> hardware config problem. Could not read from the selected boot disk. Check
> boot path and disk hardware. So it somehow knows that I want to load w2k
> which should mean that the boot sector is OK?
> "Pegasus (MVP)" сообщил/сообщила в новостях следующее:
>
>>
>> "aa" wrote in message
>>
>> >I have two harddrives on my PC, teh Primary has XP and the Slave has w2k
>> >
>> > The Primary HD crushed, I took it out and moved the Slave in its place,
>> > while seting the jamper on the Slave into "Master or single drive"
>> > position.
>> >
>> > Now how do I make this HD bootable?
>> >
>> >
>>
>> It depends.
>>
>> If the partition on the slave disk is a logical drive inside
>> an extended partition then you have to use a third-party
>> product such as Acronis to convert the logical drive into
>> a primary partition.
>>
>> If it is already a primary partition then you can do this:
>> - Boot the machine with a Win98 boot disk (www.bootdisk.com)
>> - Execute this command:
>> fdisk /mbr
>>
>> The command will restore your MBR. If someone
>> tells you that this won't work for NTFS partitions,
>> ignore them. The MBR is not part of the file system.
>>
>> Another method requires you to boot the machine
>> with your Win2000 boot CD, go into the Recovery
>> Console and execute these commands
>> fixboot
>> fixmbr
>>
>> Your machine may or may not boot after this. If it
>> does not, post again.
>>

I was under the impression that your second disk had a fully
operating version of Win2000, which used to run off drive C:.
If this is not the case then your best bet is a complete
reload of Windows 2000, followed by a reload of all
applications. Remember to back up your important data
files first.
 >> Stay informed about: Making a former Slave HD bootable 

"Pegasus (MVP)" wrote in message
news:##NYepk8HHA.2208@TK2MSFTNGP06.phx.gbl...
>
> I was under the impression that your second disk had a fully
> operating version of Win2000, which used to run off drive C:.
> If this is not the case then your best bet is a complete
> reload of Windows 2000, followed by a reload of all
> applications. Remember to back up your important data
> files first.

I think you're right. It sounds like this system is too much of a mess
for him to clean up himself, even with all of the help we can give. Even for
an expert, it could be more effort to fix then to rebuild from scratch.

--

- Gary Chanson (Windows SDK MVP)
- Abolish Public Schools
 >> Stay informed about: Making a former Slave HD bootable 

fixboot fixmbr did not help either.
My installation appeared to be on letter H drive and fixboot said that it
will write boot sectors on C - I confirmed
fixmbr warned that my existing MBR is unusual and it will rewrite it which
might result in some partitions will become invisible - I confirmed
Re-booted - same message about HD config problem.


"Pegasus (MVP)" сообщил/сообщила в новостях следующее:

>
> "aa" wrote in message
>
> >I have two harddrives on my PC, teh Primary has XP and the Slave has w2k
> >
> > The Primary HD crushed, I took it out and moved the Slave in its place,
> > while seting the jamper on the Slave into "Master or single drive"
> > position.
> >
> > Now how do I make this HD bootable?
> >
> >
>
> It depends.
>
> If the partition on the slave disk is a logical drive inside
> an extended partition then you have to use a third-party
> product such as Acronis to convert the logical drive into
> a primary partition.
>
> If it is already a primary partition then you can do this:
> - Boot the machine with a Win98 boot disk (www.bootdisk.com)
> - Execute this command:
> fdisk /mbr
>
> The command will restore your MBR. If someone
> tells you that this won't work for NTFS partitions,
> ignore them. The MBR is not part of the file system.
>
> Another method requires you to boot the machine
> with your Win2000 boot CD, go into the Recovery
> Console and execute these commands
> fixboot
> fixmbr
>
> Your machine may or may not boot after this. If it
> does not, post again.
>
>
 >> Stay informed about: Making a former Slave HD bootable 

"Pegasus (MVP)" сообщил/сообщила в новостях следующее:
news:##NYepk8HHA.2208@TK2MSFTNGP06.phx.gbl...
> I was under the impression that your second disk had a fully
> operating version of Win2000, which used to run off drive C:.
> If this is not the case then your best bet is a complete
> reload of Windows 2000, followed by a reload of all
> applications. Remember to back up your important data
> files first.
>
>

I do not remember exactly. It might be both ways.
By reload you mean format and unstall anew?
So if it was not a fully o perating version of Win2000, which used to run
off drive C, then you suggest scap it and reinstall
If it is a fully operating version of Win2000, which used to run off drive
C - when what can be done?
 >> Stay informed about: Making a former Slave HD bootable 

"aa" wrote in message

>
> "Pegasus (MVP)" сообщил/сообщила в новостях следующее:
> news:##NYepk8HHA.2208@TK2MSFTNGP06.phx.gbl...
>> I was under the impression that your second disk had a fully
>> operating version of Win2000, which used to run off drive C:.
>> If this is not the case then your best bet is a complete
>> reload of Windows 2000, followed by a reload of all
>> applications. Remember to back up your important data
>> files first.
>>
>>
>
> I do not remember exactly. It might be both ways.
> By reload you mean format and unstall anew?
> So if it was not a fully o perating version of Win2000, which used to run
> off drive C, then you suggest scap it and reinstall
> If it is a fully operating version of Win2000, which used to run off drive
> C - when what can be done?
>
>

If you don't remember which drive letter you had for
Windows 2000 and if you used the inbuilt Windows
boot loader then you can bet that your drive letter was
NOT the letter C:. You now have two options:
- Ask an expert in such matters to physically assist you.
This is too complex to be resolved in a newsgroup.
- Scrap the lot and start afresh.
 >> Stay informed about: Making a former Slave HD bootable